Reverie Limited - May 2019

We welcome on board Torqued llc www.torqued.io in San Francisco, they will be mainly focusing and stocking Reverie Steering wheels, Canards, NACA ducts and gear shift knobs, but can also supply to order all Reverie products inc FIA seats, rear wings and air boxes.

Lotus Exige S2 225mm Chord Rear Wing Kit

This lightweight (0.8KG lighter than stock) and extremely rigid high-downforce Carbon Fibre rear wing was designed by aerodynamics writer and designer Simon McBeath to fit the Lotus Exige S2 (04 - 06). The adjustable mounting allows you to fine tune the AoA and generates approximately 63% more down force than stock wing (493N of down force vs. 300N stock, 100mph at 12 deg AoA).

Wing available on our website from £1,499.00

Repairs

Previously repaired by another firm not to the customers satisfaction, we took on the job of stripping off the black pigmented clear coat and then carefully sanding the recessed area to lay a new pre-preg layer of low temperature SHD LTC210 2x2 twill carbon into, carefully exactly matching the weave. Due to the backing structures on the door card we locally vacuum bagged, not complete envelope bagging and autoclave cured overnight 65’c 9 hours. We then sanded the whole repair and applied several layers of clear primer paint, air dryed, baked and then sanded and applied 4 layers of Acrylic scratch resistant clear coat, before baking and then flatting and polishing to a high standard.